In recent years, aluminum and its alloys have been used more and more widely in the automotive industry. Aluminum alloy tank trucks in Europe, the United States, Australia, Japan and other countries have reached more than 90%. The aluminium plates for tankers are generally Al-Mg alloys such as 5083, 5182, 5454, 5059.

Almg4 5mn equivalent is 5083 aluminum alloy, which is a heat-treatment non-strengthening aluminum alloy. It can achieve a fairly high strength by work hardening without heat treatment. The thickness is 2.2M, and the thickness is 5mm, 6mm, 7mm, and 8mm.

5083 aluminum plate can store liquid materials very well. 5083 aluminum plate itself has good corrosion resistance, which can well avoid the storage of liquid materials causing the tank body to be prone to rust and corrosion, and can well extend the service life of the tank body.

5083 aluminum alloy is an aluminum alloy material with high strength, high toughness, corrosion resistance, easy processing, good thermal conductivity and fatigue resistance. It is a good choice for aluminum for tank truck bodies. By using 5083 aluminum alloy, the weight of the vehicle body can be effectively reduced, transportation efficiency and safety can be improved, and strong support can be provided for the development and progress of the tank truck industry.

5083 aluminum plate is used in the tank industry for its corrosion resistance and weldability. The same thickness of 5083 aluminum plate can resist corrosion for up to 15 years. The same size of tank has its own weight reduced by about 25%, which reduces fuel consumption, achieves energy conservation and emission reduction, and greatly increases the service life of the vehicle.

5059 alloy belongs to the 5 series aluminum-magnesium alloy aluminum plate. It has a low density and high tensile strength, which is higher than low-carbon low-carbon low-carbon steel; it has high plasticity, corrosion resistance, good weldability, and low cracking tendency. With its unique advantages, it is widely used in petrochemical and other dangerous goods special tank trucks.

5059 aluminum alloy can be heat treated in O, T6 and other states. The strength is the highest in the T6 state, but the toughness is poor. After the T6 state heat treatment, the hardness of 5059 aluminum alloy can reach 110~130HB.

Original Source:https://www.aluminumtankerplate.com/a/5083-and-5059-aluminum-sheet-for-tanker-truck.html

Tags: aluminium plate for tankers , 

Prev:How Is Aluminum Tanker Truck Market